Entry Wheels for BT Rolatruc LHM230 Pallet Truck White

Guide Entry Wheels for BT Rolatruc LHM230

Set of 2 | CNC Machined | High-Density Polyethylene

Is your pallet truck struggling to slide into pallets or InchclunkingInch against the bottom boards? These Main Guide Entry Wheels are essential for restoring smooth operation. Specifically designed for the BT Rolatruc LHM230 and compatible with most similar pallet jacks, these rollers ensure your forks glide effortlessly into position, reducing strain on the operator and protecting the fork frame.

Precision Engineering & Fitment

Each wheel is CNC machined in the United Kingdom from high-performance polyethylene for maximum durability and low friction.

• Outer Diameter: 49.0mm

• Width: 37.5mm

• Inside Diameter (Hole): 10.0mm

• Finish: Available in Black or White

Key Benefits

• Smooth Entry/Exit: Facilitates easy transition over pallet lead boards, preventing fork wear.

• Universal Compatibility: While optimized for the BT LHM230, these wheels fit various brands of pump trucks and pallet jacks with 10mm axles.

• Impact Resistant: High-density material resists flat-spotting and cracking under heavy daily use.

• Easy Installation: Standard dimensions allow for a quick swap-out to minimize warehouse downtime.

Technical Specifications

• MPN (Manufacturer Part Number): Use BT47150 (the equivalent BT part number for entry rollers) 

• Brand: Warehouse Equip (or BT Rolatruc Compatible).

Pallet Truck Entry Wheel Maintenance & Installation Guide

The entry rollers (climb wheels) are often the most overlooked part of a pallet truck, yet they are crucial for protecting your forks and ensuring the operator doesn't have to InchslamInch the truck into pallets.

1. When to Replace Your Entry Wheels

You should inspect these rollers every 6 months or sooner if you notice:

• Flattened Edges: If the wheel has a Inchflat spot,Inch it will skid rather than roll, making pallet entry difficult.

• Cracking: Hairline cracks in the polyethylene can lead to the wheel shattering under load.

• Increased Resistance: If the truck feels like it's hitting a InchwallInch when entering a pallet, the rollers are likely worn down or seized.

2. Tools You Will Need

• 10mm Pin Punch or Socket

• Hammer / Mallet

• Replacement 10mm Axle Pin (if the current one is bent)

• Lubricating Grease (Lithium-based recommended)

3. Installation Steps

1. Clear the Area: Position the pallet truck on a flat surface and ensure the forks are fully lowered.

2. Remove the Old Axle: Use a pin punch and hammer to carefully drive out the roll pin or axle bolt holding the old entry wheel in place.

3. Clean the Housing: Wipe away old grease, grit, and debris from the fork tip where the new wheel will sit.

4. Lubricate: Apply a small amount of grease to the 10mm bore of the new wheel and the axle pin.

5. Fit the Wheel: Align the new Warehouse Equip roller in the housing, slide the axle pin through, and secure it.

6. Test: Give the wheel a quick spin by hand to ensure it rotates freely.

4. Pro-Tip for Longevity

Avoid InchslammingInch the forks into empty pallets. While our CNC-machined polyethylene is high-impact, gentle entry prevents the axle pins from bending, which is the leading cause of entry wheel failure.