A load that only needs moving from goods-in to dispatch needs a very different machine from a pallet that must be placed on the second or third racking beam. That is the practical difference behind an electric pallet lorry vs stacker decision. Both reduce manual handling and improve throughput, but they are designed for different parts of the operation.
Choosing on purchase price alone can lead to a machine that is too slow for the distance travelled, unable to reach the required storage level, or unsuitable for the pallets and aisle layout already in place. Start with the load, the lift height and the route it must follow.
Electric pallet lorry vs stacker: the working difference
An electric pallet lorry is built to transport palletised loads at low level. Its forks lift a pallet just clear of the floor, typically around 85 to 200 mm depending on the model, before the operator walks alongside or rides on the machine. It is the right tool for frequent horizontal movement across a warehouse, production area, despatch bay or lorry loading area.
An electric stacker is designed to lift pallets vertically as well as move them. Depending on the model, it may lift from around 1.6 metres to more than 4 metres. This makes it suitable for placing goods into racking, stacking pallets, feeding production lines at height and making better use of vertical storage space.
The distinction sounds simple, but it affects almost every aspect of the specification. A pallet lorry generally offers faster low-level travel and a compact operating footprint. A stacker adds mast height, lift controls and a more demanding stability requirement. Where storage above floor level is involved, a pallet lorry is not a substitute.
When an electric pallet lorry is the better choice
Electric pallet lorries suit operations where pallets stay at floor level for most of their journey. Typical examples include moving incoming deliveries into a staging area, replenishing picking locations, transporting finished goods to despatch and loading trailers from a dock or level access door.
For repetitive runs, powered travel takes much of the effort out of moving heavy loads. This can be particularly useful where manual pallet lorries are being used for several hours per shift, where pallet weights are consistently high, or where operators cover long distances between workstations.
Capacity should be matched to the real load, not the occasional light pallet. Common rated capacities include 1,500 kg, 2,000 kg and 2,500 kg, although the usable figure also depends on load centre, floor condition and gradient. A 2,000 kg lorry may be a sensible choice for 800 kg pallets if the duty is intensive, but buying substantially more capacity than required can increase machine size and cost without improving the job.
Electric pallet lorries are also useful in confined areas. Their low profile and relatively small turning circle can suit busy despatch zones, narrow transport lanes and loading areas. Fork length still matters. Standard 1,150 mm forks suit many UK and Euro pallet applications, but longer loads, non-standard pallets and stillages may require a different fork arrangement.
An electric pallet lorry is not intended to raise a pallet into racking or lift it to bench height. Its lift is for clearance and travel, not storage.
When an electric stacker makes more sense
An electric stacker is the practical option when floor space is tight but racking height is available. Rather than expanding the storage footprint, it allows pallets to be placed safely on lower to medium racking levels, subject to the machine's rated lift capacity and the racking specification.
For a small warehouse, workshop store or production area, a pedestrian stacker can often provide a cost-effective step up from manual handling without moving to a full counterbalance forklift. It can lift and position loads accurately, while remaining smaller and generally simpler to operate than a larger lift lorry.
The key question is not simply, “How high is the top beam?” The required lift height must allow the pallet to clear the beam safely. Measure from floor level to the load support surface, then allow for pallet height and clearance. Also check the closed mast height, as a stacker may need to pass through doorways, under mezzanines or beneath low services before it reaches the racking.
Stacker type matters too. Straddle-leg stackers have support legs that sit either side of the pallet and contribute to stability. They work well with many open-bottom pallets, but their legs can clash with low racking beams, conveyors or certain pallet designs. Counterbalance stackers do not have straddle legs in front of the forks, allowing them to work with closed-bottom pallets and some racking layouts that a straddle model cannot approach. They are often larger and may have different capacity characteristics.
Compare the site, not just the specification sheet
A rated capacity and lift height are only useful when they match the working environment. Before choosing either machine, assess the route from the point of collection to the point of set-down.
Floor condition is a major factor. Electric pallet lorries and stackers are best used on level, sound, reasonably smooth floors. Broken concrete, thresholds, drainage channels and loose yard surfaces increase rolling resistance and place extra strain on wheels, bearings and batteries. A pallet lorry may manage a short uneven section at low speed, but frequent outdoor travel is a different application and should be specified accordingly.
Gradient also needs careful attention. Loads must not be taken up slopes or ramps unless the machine is rated for the gradient and the operating procedure is suitable. Travelling with the load uphill, controlling speed and maintaining braking performance are safety issues, not minor operating details.
Aisle width is equally significant. Measure the narrowest working aisle with pallets in place, not an empty aisle on a quiet day. A stacker needs space to turn, align and lift without striking racking or neighbouring stock. Check the manufacturer's turning radius and Ast dimension, which is the aisle width required to stack a particular pallet size at 90 degrees.
Use the actual pallet format in these calculations. UK pallets are commonly 1,200 x 1,000 mm, while Euro pallets are commonly 1,200 x 800 mm. The direction in which the pallet is picked up changes the required aisle width and can affect whether a machine will work efficiently in the available space.
Capacity at height is where stacker decisions are won or lost
With a pallet lorry, the rated capacity is generally straightforward because the load remains close to the floor. With a stacker, capacity can reduce as lift height increases or as the load centre moves forward. A long pallet, a deep stillage or a load that is not evenly distributed may place the centre of gravity beyond the standard 600 mm load centre used for many ratings.
Do not assume a stacker rated at 1,200 kg can place every 1,200 kg load at maximum height. Read the capacity plate and lift chart for the specific mast and load centre. If the operation regularly handles loads near the stated limit, allow a sensible margin rather than working at maximum capacity every day.
Load dimensions also affect visibility. A tall pallet can obscure the operator's view when travelling, so travel direction, route layout and pedestrian segregation need to be planned. High-value stock or unstable loads may also require suitable wrapping, banding or containment before they are moved.
Duty cycle, battery and maintenance
The right power arrangement depends on how often the machine works. A battery-powered pallet lorry used for occasional short movements has different needs from one running all shift across a large warehouse. Consider expected travel distance, number of lifts, load weight, shift length and charging opportunities.
Lithium battery models can suit operations that benefit from opportunity charging, where the battery is topped up during breaks or quieter periods. Lead-acid batteries may suit other applications, but they need a planned charging area and correct battery care. Whichever option is selected, charging arrangements should be clear before the machine arrives on site.
Routine checks are straightforward but necessary. Operators should inspect forks, wheels, controls, emergency stop function, battery condition and visible hydraulic components before use. Damaged pallet lorry rollers can make a machine difficult to steer and increase wear on both the lorry and floor. For stackers, mast chains, lift operation and stabilising components deserve particular attention.
Make the choice around the task
Choose an electric pallet lorry when the main requirement is frequent, efficient movement of pallets at ground level. It is usually the more direct and economical option for transport work, despatch and replenishment routes.
Choose an electric stacker when the operation must put pallets into racking or build vertical storage without relying on a full-sized forklift. Confirm the lift height, residual capacity, pallet compatibility, aisle width and overhead clearance before placing an order.
The best material-handling equipment is rarely the machine with the highest headline capacity. It is the one that handles the real pallet, on the real floor, through the real aisle, every working day without slowing the operation down.