A pallet lorry that runs smoothly across a warehouse floor can stop dead at a 25 mm threshold. The best pallet lorry ramps solve that simple but costly problem, allowing loaded pallets to pass over door sills, kerbs, vehicle floors and changes in level without shock-loading the lorry, damaging the load or putting the operator at risk.
The right ramp is not necessarily the longest or highest-capacity model available. It must suit the height difference, pallet lorry wheel arrangement, loaded weight, available approach space and the type of traffic using it. A ramp selected only by its stated capacity can still be unsuitable if the gradient is too steep, the lip does not sit securely, or the running surface is too narrow.
What Makes the Best Pallet Lorry Ramps?
For pallet lorry use, the practical requirements differ from those for a sack trolley, wheelchair or pedestrian ramp. Manual pallet lorries have small front load rollers, low ground clearance and a long fork frame. They need a gradual, stable transition at both ends. A sharp edge, unsupported ramp lip or sudden change in angle can cause the rollers to strike, jam or lift the steering wheels off the floor.
Start with the route rather than the ramp. Measure the vertical rise accurately, including any raised threshold, door track, lip or damaged concrete. Then measure the clear width between obstructions and the usable run-up area. A long ramp may provide a safer gradient, but it is of little use if it projects into a fire route, vehicle aisle or doorway.
For regular pallet movements, a purpose-made industrial ramp with a defined load rating and anti-slip surface is the sensible choice. Improvised timber, loose chequer plate or scaffold boards can move under load, split at the edge or create a trip hazard. They also make it difficult to establish a safe working limit for maintenance teams and site operators.
Load rating: allow for the full moving weight
The ramp capacity must cover more than the palletised goods. Include the pallet lorry itself, which can add around 70 kg or more depending on the model, as well as the heaviest realistic load. Where electric pallet lorries are used, the machine weight can be substantially higher and must be included in the calculation.
Check how the manufacturer states the rating. Some ramps are rated for evenly distributed loads, while a pallet lorry applies concentrated loads through small rollers and steering wheels. This point loading is more demanding than a load spread across the entire ramp deck. A stated capacity should therefore be suitable for pallet lorry wheel loads, not merely for a static, evenly distributed item of the same total weight.
Do not assume that a 2,500 kg pallet lorry rating means every ramp can safely carry a 2,500 kg pallet. The lorry's rated lift capacity relates to lifting on level ground. Ramp suitability depends on the ramp specification, gradient, wheel loading and the conditions of use.
Gradient matters more than most buyers expect
A shallow gradient makes loads easier to control and reduces the effort needed to push or pull a manual pallet lorry. It also reduces the risk of a pallet grounding, shifting or running away downhill. As the rise increases, the ramp needs to become longer to maintain a workable slope.
For occasional light movements over a low threshold, a short threshold ramp may be suitable. For a warehouse doorway used repeatedly with loaded pallets, a longer ramp usually gives safer operation and less wear on rollers, fork wheels and bearings. The available space often determines the final choice, but a steep ramp should not be treated as an acceptable compromise simply because it fits.
Manual pallet lorries should be used on slopes only where the equipment instructions, risk assessment and site procedures permit it. A loaded pallet lorry can quickly become difficult to restrain on a descent. If the route involves a significant or regular change in level, consider whether a dock leveller, lift table, fixed access arrangement or powered handling equipment is more appropriate.
Types of Pallet Lorry Ramp for Common UK Sites
The best design depends on where the obstruction sits and whether the ramp needs to move with the work.
Threshold ramps
Threshold ramps are intended for small changes in level at personnel doors, roller shutter thresholds, workshop entrances and internal room transitions. They are commonly made from aluminium, steel or heavy-duty rubber. The key requirement is a smooth leading edge that allows the pallet lorry's front rollers to climb without impact.
Rubber threshold ramps can be useful for very low rises and light-to-medium duty indoor routes. They are quick to position and can offer good grip, but dimensions and weight ratings must be checked carefully. For frequent industrial traffic or heavier loads, a metal ramp with a suitable pallet lorry rating is often the more durable option.
Kerb and container access ramps
Kerb ramps bridge a raised pavement or delivery edge where a pallet lorry must move between surfaces. Container ramps and loading ramps deal with a greater difference in height and need particular attention to capacity, ramp length and secure placement.
A ramp used at a lorry or container entrance must sit firmly against the floor or sill with no gap that could trap a wheel. It also needs adequate width for the full pallet and lorry, not just for the fork frame. Operators need enough room to keep the load centred while entering or leaving the ramp.
Fixed and portable ramps
A fixed ramp works well where the route, height and traffic pattern do not change. It can be designed around the exact threshold and may be easier to make safe through marking, edge protection and a clear operating procedure.
Portable ramps offer flexibility for maintenance work, temporary loading areas or sites with several access points. They must still be secured as intended by the manufacturer. A portable ramp is not a loose plate to be placed wherever it happens to be needed. Check whether it requires a locating lip, retaining pins, fixing points or another positive restraint method.
Key Checks Before You Buy
Before specifying a ramp, confirm these points with the person using the equipment:
- The maximum loaded pallet weight, plus the pallet lorry or electric pallet lorry weight.
- The exact rise to be bridged, measured at the highest point.
- The available ramp length and clear operating width.
- Whether traffic is manual pallet lorry, electric pallet lorry, stacker, trolley or pedestrian.
- The floor condition, including uneven concrete, drains, door tracks and surface contamination.
- Whether the ramp will be indoors, outdoors, permanently installed or moved between locations.
Also check the ramp edges. Raised side lips can help prevent wheel run-off, but they must not obstruct the intended lorry or pallet. On a confined route, clear edge marking and a level approach may be more useful than high upstands. The right arrangement depends on the ramp's width, the load dimensions and how accurately operators can line up before travel.
Surface Grip, Weather and Housekeeping
A ramp with a high-grip surface is not maintenance-free. Oil, shrink-wrap, wet leaves, ice and fine dust can reduce traction quickly, especially at an external loading point. Aluminium chequer plate offers a familiar industrial finish, but texture alone does not make a ramp safe when contamination is allowed to build up.
Include the ramp in normal housekeeping and inspection routines. Look for bent edges, loose fixings, cracks, corrosion, movement at the contact points and worn anti-slip surfaces. Any ramp that rocks, slips or has a raised damaged edge should be removed from use until it is repaired or replaced.
Operators should approach squarely and at a controlled pace. Turning on the ramp, travelling sideways across a slope or attempting to correct a badly aligned load halfway up creates unnecessary risk. Loads should be stable, within the lorry's rating and low enough to maintain a clear view of the route.
When a Ramp Is Not the Right Answer
Ramps are effective for small, manageable changes in level. They are not a substitute for suitable loading infrastructure where heavy pallets move repeatedly between vehicles, raised floors or different building levels. A steep access point used all day can increase handling time, fatigue and equipment wear, even if the ramp is technically rated for the load.
Where the operation involves frequent lorry loading, high pallet weights, powered equipment or significant elevation changes, assess purpose-built loading ramps, dock equipment or lifting solutions instead. The initial cost may be higher, but so is the benefit of predictable, safer material flow.
For a low threshold or occasional access problem, choose a ramp that is rated for the real wheel loads, wide enough for the full route and long enough to keep the gradient sensible. For regular industrial handling, clear measurements and a proper specification will save more downtime than a quick fix. Warehouse Equip UK can help trade buyers source practical handling equipment and the workshop supplies needed to keep it working.