A pallet lorry with a worn load wheel, a forklift held out of service, or a lift table waiting on a small hydraulic part can stop far more than one task. Equipment downtime quickly becomes delayed despatches, labour standing by, hurried workarounds and pressure on the rest of the fleet. For warehouses and workshops, reducing it is not just a maintenance target. It is a practical way to protect throughput, safety and margin.
The useful question is not whether a piece of equipment will ever fail. Wheels, bearings, batteries, seals and fasteners all have a working life. The question is whether the business spots deterioration early, keeps the right parts available and responds in a controlled way when a fault is reported.
What equipment downtime actually costs
The repair invoice is often the smallest part of the cost. A failed manual pallet lorry may only need a wheel assembly or a seal kit, but the disruption can be much larger if it occurs during a busy goods-in period. Operatives may have to queue for another lorry, move stock by hand or use equipment that is not suited to the job.
For powered equipment, the effect can be more significant. A forklift fault can restrict access to racking, delay loading, and force changes to planned shifts. A machine-tool issue in a workshop may stop a whole production sequence if the component cannot move to its next operation.
There is also a safety cost. Equipment with a developing fault can encourage poor practice: excessive force on a pallet lorry, improvised repairs, overloading another item of lifting equipment or using damaged trolleys. Taking equipment out of service promptly is usually less disruptive than dealing with an incident or a more serious failure later.
Not every asset warrants the same level of attention. A spare platform trolley used occasionally does not need the same maintenance response as the only electric pallet lorry serving a cold store. Classify equipment by its operational importance, the availability of alternatives, repair lead time and safety risk. This helps maintenance teams put time and stock where they make the biggest difference.
Start with better fault reporting
Many avoidable failures become expensive because the first warning is not recorded. A pallet lorry may still lift, but the steering feels rough. A scissor lift table may operate, but the platform drops slightly when held. An operator hears a new grinding noise from a wheel. These are useful observations, not minor complaints to leave until later.
Make fault reporting simple enough to use under pressure. A short form, whiteboard process or digital log should identify the asset, date, fault symptom, reporter and whether the item has been removed from use. Asset numbers or durable labels are more reliable than descriptions such as “the blue lorry by despatch”.
Encourage staff to report symptoms, rather than diagnose the repair. “Forks lower slowly under load” is better information than “needs hydraulics”. It gives the maintenance person a clear starting point without encouraging unsupported assumptions. Photographs can also help when ordering wheels, castors, chain components, handles or other visibly worn parts.
A good report should lead to a defined action: monitor, repair at the next planned stop, remove from service, or arrange external support. If reports disappear into a notebook with no owner, operators soon stop raising them.
Use a short pre-use check
Daily checks do not need to be lengthy, but they should match the equipment and its working environment. Before use, an operator can check:
- wheels, castors, forks and load backrests for visible damage or excessive wear;
- leaks around hydraulic units, hoses, cylinders and battery compartments;
- lifting, lowering, steering and braking functions where fitted;
- loose bolts, damaged handles, guards, chains, cables and safety labels;
- battery charge, charger leads and connectors on electric equipment.
Plan maintenance around use, not calendar dates alone
A six-monthly service interval may be suitable for one machine and inadequate for another. Usage hours, load weights, floor condition, temperature, contamination and operator practices all affect component life. A pallet lorry running over broken yard surfaces will wear wheels and bearings much faster than one used on smooth warehouse concrete.
Use a calendar for routine obligations, but add triggers based on operating hours, number of shifts, battery cycles or peak-season workload. For example, inspect high-use pallet lorry wheels and pivot points more frequently during periods of heavy inbound stock. Schedule work at quieter times where possible, but do not postpone a repair simply because the diary says the next service is weeks away.
Maintenance records should show what was found as well as what was replaced. Over time, this identifies repeat faults. If several lorries are repeatedly losing load wheels, the cause may be poor floor condition, unsuitable wheel material, overloading, incorrect fitting or a part specification that does not suit the application. Replacing the same item without examining the cause only restores the problem temporarily.
This approach also improves purchasing. A maintenance history makes it easier to hold the correct wheel diameter, bore size, bearing type, seal kit or fastener rather than ordering from a vague description after a breakdown. Clear specifications reduce costly returns and delays.
Keep critical spares without turning stores into a graveyard
Holding every possible spare part ties up cash and creates confusion. Holding nothing leaves a team dependent on delivery times when a failure occurs. The sensible position sits between the two.
Identify parts that are inexpensive, prone to wear and likely to stop a critical item of equipment. For manual pallet lorries, that may include steer wheels, load wheel assemblies, bearings, retaining clips, handles and hydraulic service parts. For workshop and facility maintenance, commonly used bolts, washers, nuts, grub screws, pins and fixings often prevent a small repair from being delayed for days.
Stock levels should reflect actual consumption and supplier lead time. A business with multiple matching pallet lorries can justify holding common parts because one component may fit several assets. Conversely, a specialised component for a machine used rarely may be better ordered when required, provided a suitable contingency exists.
Store spares cleanly and label them with the part number, dimensions, material and compatible equipment where known. A box labelled only “wheels” is not a spares strategy. For engineering materials used in repairs, record grade and size clearly. A stainless steel fastener, an aluminium bar and an acetal component may look like straightforward substitutes, but material choice can affect strength, corrosion resistance, wear and food-area suitability.
Protect equipment through correct use
Maintenance cannot compensate for routine misuse. Overloading, shock loading, towing with unsuitable equipment and moving loads across damaged floors will shorten service life. So will using pallet lorries as skates, leaving electric equipment with a flat battery, or fitting unverified replacement parts.
Training should be specific to the tasks being carried out. Operators need to know the rated capacity, load centre where relevant, floor limits, charging arrangements and what a normal operating feel or sound is. This is especially useful with shared equipment, agency staff and changing shift patterns.
Supervisors also need to make the safe option workable. If there are not enough pallet lorries for the workload, people will use the nearest available item regardless of condition or capacity. If charging areas are inconvenient, batteries may be left low until performance becomes a problem. Equipment availability, layout and workload planning all influence reliability.
Measure the failures that matter
Simple measures are enough to show whether action is working. Record the number of breakdowns, total hours or shifts out of service, repeat failures, time waiting for parts and the equipment affected. Separate planned maintenance time from unplanned stoppage. A machine taken out of use for a scheduled wheel change is not the same as a machine failing during a loading window.
Review the pattern monthly. If downtime rises on a particular asset type, look at the operating conditions before blaming the product. A recurring hydraulic problem may point to contamination or damage. Frequent damaged wheels may point to thresholds, debris or poor dock plates. Long repair times may point to missing part details, unclear approval limits or no nominated person to place urgent orders.
For high-use assets, set a realistic target for repair response and spares availability. The target should reflect the consequences of failure, not an arbitrary percentage. A warehouse with a backup lorry can accept a different response time from a workshop where one lift table is essential to a manual handling process.
Buy for repairability as well as purchase price
The cheapest item is not always the lowest-cost choice if replacement parts are difficult to identify or obtain. When selecting material-handling equipment, check the load rating, wheel material, fork dimensions, lift height, environment of use and availability of service parts. For powered products, consider battery type, charging requirements, service access and support arrangements.
Standardising where practical can reduce downtime. Using compatible pallet lorries across a site, common wheel types on trolleys, and established fastener sizes in maintenance work makes stockholding and repairs simpler. There are limits: standardisation should not force unsuitable equipment into demanding applications. The correct specification still comes first.
Warehouse Equip UK supplies material-handling equipment alongside replacement parts, fasteners, engineering materials and workshop components, which can help maintenance teams consolidate routine purchasing and reduce the number of separate orders needed for a repair.
The most reliable operation is not the one that never experiences a fault. It is the one that notices wear early, removes unsafe equipment without delay, has a clear repair route and learns from every repeat failure. That discipline keeps small defects from becoming lost shifts.