Cone Point Grub Screw Set, A2 Stainless Steel, M3–M6 x 5mm, 16 Pack

This mixed cone point grub screw set contains 16 A2 stainless steel socket set screws in M3, M4, M5 and M6 sizes. Every screw is 5mm long, with four screws of each thread diameter. The internal hex socket requires a matching Allen key.

The assortment is intended for fixing applications, including door handles, taps and handrails where the fitting specifies a compatible cone point screw. Check the original fastener and fitting requirements before selecting a replacement.

Pack contents and tool sizes

• 4 × M3 x 5mm: 0.5mm thread pitch; requires a 1.5mm Allen key.
• 4 × M4 x 5mm: 0.7mm thread pitch; requires a 2mm Allen key.
• 4 × M5 x 5mm: 0.8mm thread pitch; requires a 2.5mm Allen key.
• 4 × M6 x 5mm: 1mm thread pitch; requires a 3mm Allen key.
• Total supplied: 16 grub screws.

Material and specification

• Material: A2 grade stainless steel.
• Point style: cone point.
• Drive: internal hex socket.
• Threads: metric, with pitches listed above.
• Length: 5mm, approximately 0.197 inches, for every screw.

Choosing the correct screw

Match the thread diameter, pitch, length and point style to the component specification. Door handles, taps and handrails do not all use the same fastener, so this assortment should not be treated as a universal replacement kit.

A2 stainless steel offers corrosion resistance for fixing applications. These screws are not suitable as replacements in high-tensile applications. Check the required material and strength before installation.

Frequently asked questions

Are the screw lengths mixed?

No. All 16 screws are 5mm long. Only the thread diameters and corresponding socket sizes vary.

Are Allen keys included?

The required key sizes are 1.5mm, 2mm, 2.5mm and 3mm. Key inclusion is not specified for this pack.

Will these fit my door handle or tap?

Only if the fitting requires the matching thread diameter, pitch, 5mm length and cone point style. Check the fitting specification first.